86-755-86277191
| MODEL | QW060-015-P | |||||
| OUTPUT | DC VOLTAGE | 6V | ||||
| RATED CURRENT | 1.5A | |||||
| CURRENT RANGE | 0-1.5A | |||||
| RATED POWER | 9W | |||||
| RIPPLE&NOISE(max.) Note.2 | 120mVp-p | |||||
| VOLTAGE TOLERANCE Note.3 | ±5% | |||||
| LINE REGULATION Note.4 | ±0.5% | |||||
| LOAD REGULATION Note.5 | ±1% | |||||
| SETUP,RISE TIME | 100ms,50ms/230VAC 100ms,50ms/115VAC at full load | |||||
| HOLD UP TIME(Typ.) | 20ms/230VAC 10ms/115VAC at full load | |||||
| INPUT | VOLTAGE RANGE | 110-240VAC | ||||
| FREQUENCY RANGE | 47-63Hz | |||||
| EFFICIENCY(Typ.) | 80% | |||||
| AC CURRENT(Typ.) | 0.5A 230VAC 0.8A/115VAC | |||||
| INRUSH CURRENT(Typ.) | cold start 30A 230VAC | |||||
| LEAKAGE CURRENT | <2mA 230VAC | |||||
| PROTECTION | OVERLOAD | Above 120% rated power | ||||
| Protection type:Hiccup mode,recovers automatically after fault condition is removed | ||||||
| SHORT-CIRCUIT | Protection type:Hiccup mode,recovers automatically after fault condition is removed | |||||
| ENVIROMENT | WORKING TEMP. | -10ºC~+40ºC | ||||
| WORKING HUMIDITY | 20%~90%RH | |||||
| STORAGE TEMP.,HUMIDITY | -20ºC~+85ºC,10%~95%RH | |||||
| TEMP.COEFFICIENT | ±0.03%ºC(0-40ºC) | |||||
| VIBRATION | 10-500Hz, 2G 10min./1cycle,period for 60min. Each along X,Y,Z, axes | |||||
| SAFETY | WITHSTAND VOLTAGE | I/P-O/P:1.8KVAC I/P-Case:1.8KVAC | ||||
| OTHERS | DIMENSION | 75*29*40mm(L*W*H) | ||||
| PACKING | 0.1KG,100PCS/10.6KGS/0.056CBM | |||||
| NOTES | 1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temparature | |||||
| 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12"twisted pair-wire terminal with a 0.1uf&47uf parallel capacitor | ||||||
| 3.Tolerance:includes set up tolerance,line tolerance and load tolerance | ||||||
| 4.Line regulation is measured from low line to high line at rated load | ||||||
| 5.Load regulation is measured from 0% to 100% rated load. | ||||||
